product

GMT100

Motorcycle GPS Tracker
Product Description: 

 

The GMT100 is an IPX6 water resistant GPS tracker designed for applications requiring low current drain such as motorcycles and boats. The model has three working power modes to achieve excellent power management, including zero current drain from vehicles when ignition is off. Besides, the GMT100 can further reduce current drain via configuring alternative recharge schemes for its internal battery.

 

Features: 
  • Wide operating voltage 8V to 32V DC
  • Internal u-blox chipset
  • Low power consumption, long standby time with internal battery
  • Quad band GSM/GPRS 850/900/1800/1900 MHz
  • Embedded full featured @Track protocol
  • Multiple I/O interfaces for monitoring and control
  • Internal 3-axis accelerometer for power saving and motion detection
  • Power consumption can be fully configured
  • Three working power modes
  • Water resistant, IPX6 compliant
 
 
Specification: 

GSM Specifications

Frequency

Quad band: 850/900/1800/1900 MHz

Compliant to GSM phase 2/2+

-Class 4 (2W @ 850/900 MHz)

-Class 1 (1W @ 1800/1900 MHz)

GPRS

GPRS multi-slot class 10

GPRS mobile station class B

RMS Phase Error 5 deg
Max RF Output Power

GSM850/GSM900: 33.0±2 dBm

DCS1800/PCS1900: 30.0±2 dBm

Dynamic Input Range -15 ~ -108 dBm
Receiver Sensitivity Class Ⅱ RBER 2% (-107 dBm)
Stability of Frequency < 2.5 ppm
Max Frequency Error ±0.1 ppm

 

GNSS Specifications

GNSS Type u-blox All-In-One GPS receiver
Sensitivity

Autonomous: -147 dBm

Hot start: -156 dBm

Reacquisition: -160 dBm

Tracking: -162 dBm

Position Accuracy (CEP)

Autonomous: < 2.5m

TTFF (Open Sky)

Cold start: 27s average

Warm start: 27s average

Hot start: 1s average

 

Interfaces

Digital Inputs

1 positive trigger input for ignition detection

1 negative trigger input for normal use

Analog Input 1 analog input (0.3V-32V)
Digital Output 1 digital output high side 750 mA max
Relay Output

1 relay output with internal latch circuit

Drive current max 20A @ DC12V

GSM/GPS Antenna Internal only
LED Indicators GSM,GPS, PWR
Mini USB Interface Used for upgrading, debugging and configuration

 

General Specifications

Dimensions 86mm(L) x 62mm(W) x 26mm(H)
Weight 148g
Backup Battery Li-Polymer, 1300 mAh
Operating Voltage 8V to 32V DC
Standby Time

Without reporting: 380 hours

5 minutes’ reporting: 190 hours

10 minutes’ reporting: 230 hours

Operating Temperature

-30℃ ~ +80℃

-40℃ ~ +80℃ for storage

Power Management

Three working modes including zero current drain from vehicle when ignition is off

 

Air Interface Protocol

Transmit Protocol TCP, UDP, SMS
Scheduled Report Report position and status based on preset time intervals, distance, mileage or a combination of these settings
Geo-fences Geo-fence alarm and parking alarm, support up to 5 internal geo-fence regions
Low Power Alarm Alarm when backup battery is low
Power On Report Report when the device is powered on
Tow Alarm Alarm for tow event in ignition-off state
Special Alarm Special alarm based on digital/analog inputs
Remote Control OTA control of digital outputs