LTE CAT1 Vehicle Tracking Device
Product Description: 

The GV50LTA is a LTE CAT1 micro GPS tracker designed for a wide variety of vehicle tracking applications. It has multiple I/O interfaces that can be used for monitoring or controlling external devices. Its built-in GPS receiver has superior sensitivity and fast time to first fix. Its dual band LTE CAT1 allows the GV50LTA location to be monitored in real time or periodically tracked by a backend server and mobile devices. System integration is straightforward as complete documentation is provided for the full featured @Track protocol. The @Track protocol supports a wide variety of reports including emergency, geo-fence boundary crossings, external power supply monitoring and scheduled GPS position.

  • Micro-sized and ultra-thin device allowing easier and more covert installation
  • Cost effective solution for basic tracking

  • Internal u-blox GPS chipset
  • Dual band LTE CAT1 B4&B13
  • Embedded full featured @Track protocol

  • Multiple I/O interfaces for monitoring and controlling
  • Internal 3-axis accelerometer for motion detection
  • Internal LTE antenna
  • Internal GPS antenna
  • FCC/Verizon certified

LTE Specifications

Operation Band

LTE Band 4

LTE Band 13

Max Data Rate

Download: 10 Mbps

Upload: 5 Mbps

Max Out RF Power 21 ~ 25 dBm
Minimum Out RF Power < -40 dBm
Dynamic Input Range -25 ~ -110 dBm
Receiving Sensitivity

Band 13, 10 MHz: -93.3 dBm

Band 4, 10 MHz: -96.3 dBm

Max Frequency Error ±0.1 ppm

GPS Specifications

GPS Chipset u-blox All-In-One GPS receiver

Autonomous: -147 dBm

Hot start: -156 dBm

Reacquisition: -160 dBm

Tracking: -162 dBm

Position Accuracy (CEP)

Autonomous: < 2.5m

SBAS: 2.0m

TTFF (Open Sky)

Cold start: 27s average

Warm start: 27s average

Hot start: < 1s average


Digital Inputs One positive trigger for ignition detection
Digital Outputs One open drain, 150 mA max drive current
Digital Inputs/Outputs

One negative trigger input for normal use or 

One open drain output 150 mA max drive current

Communication Port One TTL UART port for upgrading and debugging
LTE Antenna Internal antenna
GPS Antenna Internal patch antenna
Indicator LED CEL and GPS

General Specifications

Dimensions 87mm*55mm*12.5mm
Weight About 50g
Backup Battery Li-Polymer 190 mAh
Operating Voltage DC 8V to 32V
Operating Temperature

-30℃ ~ +80℃

-40℃ ~ +85℃ for storage

Air Interface Protocol

Transmit Protocol TCP, UDP, SMS
Scheduled Timing Report Report position and status at preset intervals
Geo-fence Geo-fence alarm, support up to 20 circular and 20 polygon geo-fence regions
Power On Report Report when the device is powered on
Special Alarm Special alarm based on the digital inputs
Remote Control OTA control of digital outputs