Compare

GL530

Advanced Standby Asset Tracker

1. Up to 5 year of standby time

2. User replaceable batteries

3. Built-in light sensor for removal alert

4. No installation required

5. Ideal for asset monitoring and management

The GL530 is an easy-to-deploy asset tracker featuring up to 5-year standby time and supporting flexible shifts between dormant and active working modes for better battery performance. With its built-in light sensor, you don’t need to worry about tamper attempts as they will trigger alerts right away. The product’s slim design suits diverse installation locations and is therefore ideal for use in many scenarios, such as valuable cargo transport, stolen vehicle recovery, construction machine rental and leasing, container monitoring and more.

Related Products

GL530M

Specifications

GSM Specifications

Frequency Quad band GSM/GPRS 850 / 900 / 1800 / 1900 MHz
Compliant to GSM phase 2/2+
-Class 5 (0.8W @ 900 MHz)
-Class 1 (1W @ 1800 MHz)
GPRS GPRS multi-slot class 8
GPRS mobile station class B
RMS Phase Error 5 deg
Max RF Output Power GSM850/GSM900: 29.0±2 dBm
DCS1800/PCS1900: 30.0±2 dBm
Dynamic Input Range -15 ~ -108 dBm
Receiver Sensitivity Class Ⅱ RBER 2% (-107 dBm)
Stability of Frequency < 2.5 ppm
Max Frequency Error ±0.1 ppm

GNSS Specifications

GNSS Type u-blox All-in-One GPS receiver
Sensitivity Autonomous: -147 dBm
Hot start: -156 dBm
Reacquisition: -160 dBm
Tracking: -162 dBm
Position Accuracy (CEP) Autonomous: < 2.5m
TTFF (Open Sky) Cold start: 27s average
Warm start: 27s average
Hot start: 1s average

General Specifications

Dimensions 106 x 43 x 22.5mm
4.17”(L) x 1.69”(W) x 0.89”(H)
Weight 100g (3.53oz)
Internal Battery CR123A lithium manganese dioxide battery pack, 1500 mAh, 9V
Standby Time One report per day (GPS off): 1800 days (≈ 5 Years)
One report per day (GPS on): 1300 days (> 3 Years)
Operating Temperature -20℃ ~ +60℃

Interfaces

GSM Antenna Internal only
GPS Antenna Internal only
LED Indicators GSM, GPS
Serial Port Micro USB

Air Interface Protocol

Command Set @Track protocol command
Transmit Protocol TCP, UDP, SMS
Working Mode Power saving mode with configurable sleep cycles for long standby time
Continuous mode for emergency tracking
Scheduled Timing Report Report position and status at preset time intervals
Geo-fences Support up to 5 internal geo-fence regions
Low Power Alarm Alarm when battery is low
Wakeup Report Report when the device wakes up
Reporting Frequency Adjustment Intelligent adjustment of reporting frequency for long standby time

Resource

Product-Related Files

GL530 Flyer(EN)

Schedule Your Consultation