The GV58LAU is the most cost-effective LTE Cat 4 telematics device ideal for variety of fleet management applications ranging from general fleet tracking, car rental and leasing to stolen vehicle recovery, logistics and more. The product supports various BLE accessories including temperature and humidity, driver identification sensors either from Queclink or our selected partners
Certificates
Related Products
Specifications
LTE Specifications
Operating Band | LTE-FDD: B1/B2/B3/B4/B5/B7/B8/B28 LTE-TDD:B40 |
Data Transmission | LTE-FDD:Max 150Mbps(DL)/Max 50Mbps(UL) LTE-TDD:Max 150Mbps(DL)/Max 30Mbps(UL) |
WCDMA Specifications
Operating Band | B1/B2/B5/B8 |
Data Transmission | DC-HSDPA: Max 21Mbps (DL) HSUPA: Max 5.76Mbps (UL) WCDMA: Max 384Kbps (DL)/Max 384Kbps (UL) |
EGPRS Specifications
Frequency | 850/900/1800/1900MHz |
Data Transmission | EDGE:(DL)236.8Kbps/(UL)236.8Kbps GPRS:(DL)85.6Kbps/(UL)85.6Kbps |
GNSS Specifications
GNSS Type | u-blox All-in-one GNSS receiver |
Constellation Support | GPS,Glonass,Galileo,Beidou |
Sensitivity | Cold start: -148 dBm Hot start: -160 dBm Tracking: -167 dBm |
Position Accuracy (CEP) | Autonomous: < 2.0m |
TTFF (Open Sky) | Cold start: 24s average Hot start: 1s average |
General Specifications
Dimensions | 86.7(L) x 46.4(W) x 18.1(H)mm |
Weight | 80g |
Backup Battery | Li-Polymer, 190 mAh |
Operating Voltage | 8V to 32V DC |
Operating Temperature | -30℃ ~ +70℃ -40℃ ~ +80℃ for storage |
BLE | Support BLE 5.2 protocol |
Interfaces
Digital Input | 1 positive trigger input for ignition detection 1 negative trigger input or 1 digital output, open collector/drain, maximum output current 150 mA |
Digital Output | 1 digital output, open drain, 150 mA max drive current |
Latched Digital Output | 1 digital output with internal latch circuit, open drain, 150 mA max drive current |
Cellular Antenna | Internal Primary, Rx-diversity Antenna |
GNSS Antenna | Internal only |
BLE Antenna | Internal only |
LED Indicators | CELL, GNSS, PWR |
Micro USB Interface | Internal only / Used for configuration, upgrade and debug |
Air Interface Protocol
Transmit Protocol | TCP, UDP, SMS |
Scheduled Report | Report position and status based on preset time intervals, distance, mileage or a combination of these settings |
Geo-fences | Geo-fence alarm, support up to 20 circular and 20 polygon geo-fence regions |
Low Power Alarm | Alarm when backup battery is low |
Power On Report | Report when the device is powered on |
Tow Alarm | Alarm for tow event in ignition-off state |
Driving Behavior Monitoring | Aggressive driving behavior detection, including harsh braking, acceleration, etc. |
Crash Detection | Accident data collection for reconstruction and analysis |
Special Alarm | Special alarm based on digital/analog inputs |
Remote Control | OTA control of digital outputs |
Resource
Product-Related Files
Applications
Schedule Your Consultation