Compare

GB100P

Battery Mounted Vehicle Tracker with Built-in BLE

1. Safe installation in under five minutes

2. GB100 series products are successfully deployed in large UBI projects worldwide

3. Water resistant, compliant to IP65

4. Supports BLE 4.2

5. Internal 6-axis accelerometer supports accurate crash data packets and one second GPS sampling

6. Ideal for UBI and automobile finance applications

The GB100P improves on the GB100 model adding an upgraded 6-axis accelerometer allowing accurate accident data that is sampled up to 1600 times per second. The addition of BLE allows for compatibility with wireless accessories; thus increasing flexibility and suitability for applications beyond insurance data acquisition.
The GB100P is a vehicle battery mounted product specifically designed to lower the installation cost of telematics products for the usage-based insurance market. Its internal battery and waterproof enclosure maintain stable and reliable performance when installed in the engine compartment of vehicles. The GB100 series is proven to provide accurate and reliable data under the metal hood of a vehicle engine and has been used successfully in the delivery of several large UBI projects for insurers and service providers alike.

Related Products

GB100
GB100MG

Specifications

GSM Specifications

Frequency Quad band: 850 / 900 / 1800 / 1900 MHz
Compliant to GSM phase 2/2+
-Class 4 (2W @ 850/900 MHz)
-Class 1 (1W @ 1800/1900 MHz)
GPRS GPRS multi-slot class 10
GPRS mobile station class B
GPRS class 12 by default
RMS Phase Error 5 deg
Max RF Output Power GSM850/GSM900: 33.0±2 dBm
DCS1800/PCS1900: 30.0±2 dBm
Dynamic Input Range -15 ~ -108 dBm
Receiver Sensitivity Class Ⅱ RBER 2% (-107 dBm)
Stability Of Frequency < 2.5 ppm
Max Frequency Error ±0.1 ppm

GNSS Specifications

GNSS Type u-blox All-in-One GNSS receiver
Sensitivity Autonomous: -147 dBm
Hot start: -156 dBm
Reacquisition: -160 dBm
Tracking: -162 dBm
Position Accuracy (CEP) Autonomous: < 2.5m
TTFF (Open Sky) Cold start: 27s average
Warm start: 27s average
Hot start: 1s average

General Specifications

Dimensions 91.5 x 51.5 x11mm
3.60”(L) x 2.03”(W) x 0.43”(H)
Weight 75g (2.65oz)
Backup Battery High temperature NiMH, 200 mAh
Water Resistance IP65 Compliant
Operating Voltage 8V to 32V DC
Operating Temperature -20℃ ~ +70℃
-20℃ ~ +70℃for storage
Operating Humidity 0%~95% non-condensing
Internal Accelerometer 3-axis Accelerometer: 1600 Hz
Internal Gyroscope MEMS gyro-sensor
BLE Support BLE 4.2 protocol
Buffer Messages Up to 10,000 buffer messages

Interfaces

GSM Antenna Internal only
GNSS Antenna Internal only
BLE Antenna Internal only
LED Indicators GSM, GPS, PWR

Air Interface Protocol

Transmit Protocol TCP, UDP, SMS
Power Supply Monitoring Report/alarm of external power and backup battery status
Scheduled Report Report position and status based on preset time intervals, distance, mileage or a combination of these settings
Geo-fences Geo-fence alarm and parking alarm based on up to 20 preset geo-fence regions
Speed Alarm Unusual speed alarm via flexible monitoring of speed
Driving Behavior Monitoring Aggressive driving behavior detection, including harsh braking, acceleration, etc.
Compressed GPS Data Packet 1 second GPS data packet while vehicle is in motion
Crash Data Packet Crash data collection from accelerometer up to 15 seconds before and after an incident

Applications

Related Accessories

You may also like…

Schedule Your Consultation