GMT200

Compact Motorcycle Tracker

1. Compact size

2. Waterproof, compliant to IPX6

3. Zero power consumption when ignition is off

4. Ideal for watercraft tracking and motorcycle monitoring applications

The GMT200 is a fully customized tracker designed for biking enthusiasts. With a compact design it allows flexible installation on motorcycles of any size. Combining Queclink’s revolutionary zero power consumption with an innovative power management algorithm, the product allows bikers to leave their motorcycles unattended for long periods of time without having to worry about a flat battery. Its unique monitoring and alerts for bike movement or topple provide early theft warning.

Certificates

FCC, CE, E-Mark

Specifications

GSM Specifications

Frequency	Quad band: 850 / 900 / 1800 / 1900 MHz Compliant to GSM phase 2/2+ -Class 4 (2W @ 850/900 MHz) -Class 1 (1W @ 1800/1900 MHz)
GPRS	GPRS multi-slot class 10 GPRS mobile station class B
RMS Phase Error	5 deg
Max RF Output Power	GSM850/GSM900: 33.0±2 dBm DCS1800/PCS1900: 30.0±2 dBm
Dynamic Input Range	-15 ~ -108 dBm
Receiver Sensitivity	Class Ⅱ RBER 2% (-107 dBm)
Stability of Frequency	< 2.5 ppm
Max Frequency Error	±0.1 ppm

GNSS Specifications

GNSS Type	u-blox All-in-One GPS receiver
Sensitivity	Autonomous: -147 dBm Hot start: -156 dBm Reacquisition: -160 dBm Tracking: -162 dBm
Position Accuracy (CEP)	Autonomous: < 2.5m
TTFF (Open Sky)	Cold start: 27s average Warm start: 27s average Hot start: 1s average

General Specifications

Dimensions	70 x 46 x17.5mm 2.76”(L) x 1.81”(W) x 0.69”(H)
Weight	62g (2.19oz)
Backup Battery	Li-Polymer, 650 mAh
Standby Time	Without reporting: 140 hours 5 minutes’ reporting: 70 hours 10 minutes’ reporting: 90 hours
Water Resistance	IPX6 compliant
Operating Voltage	9V to 32V DC
Operating Temperature	-20℃ ~ +80℃ -40℃ ~ +80℃ for storage
Power Management	Three working modes including zero current drain from vehicle when ignition is off

Interfaces

Digital Inputs	1 positive trigger input for ignition detection 1 negative trigger input for normal use
Latched Digital Output	1 digital output with internal latch circuit, open drain, 150mA max drive current
GSM Antenna	Internal only
GPS Antenna	Internal only
LED Indicators	CEL, GPS, PWR
Mini USB Interface	Used for external power and configuration

Air Interface Protocol

Transmit Protocol	TCP, UDP, SMS
Scheduled Report	Report position and status based on preset time intervals,distance, mileage or a combination of these settings
Geo-fences	Geo-fence alarm and parking alarm, support up to 5 internal geo-fence regions
Power On/Off Report	Report when the device is powered on and off
Tow Alarm	Alarm for tow event in ignition-off state
Special Alarm	Special alarm based on digital inputs
Low Power Alarm	Alarm when backup battery is low
Remote Control	OTA control of digital outputs