|
Stock: 300590.SZ
WCDMA/GSM Advanced Vehicle Tracker
The GV300W is the WCDMA/3G version of our best-selling GV300. Its appeal comes from its flexibility and ability to be used in a wide variety of heavy truck and car management applications. Its wide range of pre-integrated accessories provided either by Queclink, or our carefully selected partners, allows it to support additional capabilities such as CAN data capture, RS232 data acquisition and I/O expansion via our extender products.
Certificates
Related Products
GSM Specifications
| Frequency | GSM: 850 / 900 / 1800 / 1900 MHz Compliant to GSM phase 2/2+ -Class 4 (2W @ 850/900 MHz) -Class 1 (1W @ 1800/1900 MHz) |
| GPRS | GPRS multi-slot class 12 (10 by default) GPRS mobile station class B |
UMTS/ HSPA Specifications
| Frequency | UMTS: 850 / 1900 / 2100 MHz UMTS: Class 3 (0.25W@ 850 / 1900 / 2100 MHz) |
| Data Transmission | HSDPA: Max 3.6Mbps (DL) WCDMA: Max 384Kbps (DL)/ Max 384Kbps (UL) |
GNSS Specifications
| GNSS Type | u-blox All-in-One GPS receiver |
| Sensitivity | Autonomous: -147 dBm Hot start: -156 dBm Reacquisition: -160 dBm Tracking: -162 dBm |
| Position Accuracy (CEP) | Autonomous: < 2.5m |
| TTFF (Open Sky) | Cold start: 27s average Warm start: 27s average Hot start: 1s average |
General Specifications
| Dimensions | 80 x 49 x 26mm 3.15”(L) x 1.93”(W) x 1.02”(H) |
| Weight | 72g (2.54oz) |
| Backup Battery | Li-Polymer, 250 mAh |
| Operating Voltage | 8V to 32V DC |
| Operating Temperature | -30℃ ~ +70℃ -40℃ ~ +70℃ for storage |
| Operating Humidity | 0%~95% non-condensing |
| Buffer Messages | Up to 10,000 buffer messages |
Interfaces
| Digital Inputs | 1 positive trigger input for ignition detection 2 negative trigger inputs for normal use |
| Configurable Input | 1 special input can be configured as a negative trigger digital input or an analog input (0V-16V) |
| Analog Input | 1 analog input (0.3V-16V) |
| Digital Outputs | 2 digital outputs, open drain, 150 mA max drive current |
| Latched Digital Output | 1 digital output with internal latch circuit, open drain, 150 mA max drive current |
| Serial Port | 1 RS232 serial port on 16 pin molex type connector, for external devices (GARMIN protocol support) |
| Two-way Audio Interfaces | 1 differential output 1 single end input |
| Cellular Antenna | Internal only |
| GNSS Antenna | Internal antenna and optional external antenna |
| LED Indicators | CEL, GNSS, PWR |
| Mini USB Interface | Used for upgrading and debugging |
Air Interface Protocol
| Transmit Protocol | TCP, UDP, SMS |
| Scheduled Report | Report position and status based on preset time intervals, distance, mileage or a combination of these settings |
| Geo-fences | Geo-fence alarm and parking alarm, support up to 20 internal geo-fence regions |
| Low Power Alarm | Alarm when backup battery is low |
| Power On Report | Report when the device is powered on |
| Tow Alarm | Alarm for tow event in ignition-off state |
| Antenna Disconnect Alarm | Alarm when external GPS antenna is disconnected |
| Driving Behavior Monitoring | Aggressive driving behavior detection, including harsh braking, acceleration, etc. |
| Crash Detection | Accident data collection for reconstruction and analysis |
| Special Alarm | Special alarm based on digital/analog inputs |
| Remote Control | OTA control of digital outputs |
Product-Related Files
Videos
With Queclink’s GV58CEU and a range of accompanying accessories, effortless driver identification and authorization are achieved, paving the way for more intelligent fleet management.
