Compare

GV305CEU

LTE Vehicle Tracker with BLE and Multiple Interfaces

1.   Multiple interfaces enable remote control and monitoring based on actionable data of ignition status

2.   Standard 1-wire interface available for the driver ID, detecting unauthorized private use of fleet vehicles

3.   Built-in BLE 5.2 grants greater expandability of a range of accessories such as BLE beacons and temperature monitoring sensors

4.   RS232 and RS485 serial ports enable additional functions such as fuel level monitoring

5.   Supports a variety of pre-integrated accessories either from Queclink or from our selected partners

The GV305CEU is a versatile LTE Cat 1 vehicle tracker ideal for fleet management with GNSS connectivity. With multiple interfaces, the device supports a wide range of pre-integrated accessories either of Queclink or from our selected partners via RS232 or RS485 serial ports, providing additional functions such as fuel level monitoring and driver identification. Its built-in BLE allows connectivity to diverse wireless accessories such as BLE beacons and temperature monitoring sensors.

Related Products

GV300CAN
GV350MG
GV350CEU

Specifications

LTE Specifications

Operating Band LTE-FDD: B1/B3/B7/B8/B20/B28
Data Transmission LTE-FDD: Max 10Mbps (DL)/Max 5Mbps (UL)

EGPRS Specifications

Frequency 900/1800 MHz
Data Transmission EDGE: (DL) Max 236.8Kbps/(UL)Max 236.8Kbps
GPRS: (DL)Max 85.6Kbps/(UL)Max 85.6Kbps

General Specifications

Dimensions 94(L) x 58.5(W) x 21(H)mm
Weight 71g
Backup Battery Li-Polymer, 250 mAh
Operating Voltage 8V to 32V DC
Operating Temperature -30℃ ~ +70℃
-40℃ ~ +80℃ for storage
BLE Support BLE 5.2 protocol

GNSS Specifications

GNSS Type u-blox All-in-One GNSS receiver
Constellation Support GPS,Glonass,Galileo,Beidou
Sensitivity Cold start: -148 dBm
Hot start: -160 dBm
Tracking: -167 dBm
Position Accuracy (CEP) Autonomous: < 2m
TTFF (Open Sky) Cold start: 24s average
Hot start: 1s average

Interfaces

Digital Inputs 1 positive trigger input for ignition detection
4 negative trigger inputs for normal use
Analog Inputs 2 analog input (0V-16V),1 analog input(0-30V)
Digital Outputs 6 digital outputs
Latched Digital Output 1 digital output one with internal latch circuit, open drain, 150 mA max drive current
Serial Port 1 RS232 serial port on 22 pin Molex type connectors, for external devices.1 RS485 serial port on 22pin Molex type connectors, for external devices
Cellular Antenna Internal only
GNSS Antenna Internal antenna
BLE Antenna Internal only
LED Indicators Cellular network, GNSS, Power status, BLE status
Mini USB Interface Used for configuration, upgrade and debug
1-Wire Interface VDD,DATA for one wire

Air Interface Protocol

Transmit Protocol TCP, UDP, SMS
Scheduled Report Report position and status based on preset time intervals, distance, mileage or a combination of these settings
Geo-fences Geo-fence alarm and parking alarm, support up to 20 internal geo-fence regions
Low Power Alarm Alarm when backup battery is low
Power On Report Report when the device is powered on
Tow Alarm Alarm for tow event in ignition-off state
Driving Behavior Monitoring Aggressive driving behavior detection, including harsh braking, acceleration, etc.
Crash Detection Accident data collection for reconstruction and analysis
Special Alarm Special alarm based on digital/analog inputs
Remote Control OTA control of digital outputs

Resource

Product-Related Files

GV305CEU Flyer(EN)

Schedule Your Consultation