GV500

Plug-In Vehicle Tracker with OBDII Support

1. Plug and play, reliably reads ISO CAN Bus data

2. Supports driving behavior monitoring and crash detection

3. Optimal GNSS performance from two orthogonal GNSS antennas

4. Ideal for UBI, car leasing and fleet management applications

The GV500 is a compact product developed with OBDII port plug and play installation. Its unique auto tuning of GPS antenna design ensures best-in-class GPS performance for applications including light truck tracking, breakdown assistance, dealer lot management and new driver monitoring. The GV500 supports reliable standard vehicle data gathering of VIN, odometer and diagnostic trouble codes (DTC) for vehicle maintenance applications.

Specifications

GSM Specifications

Frequency	Quad band: 850 / 900 / 1800 / 1900 MHz Compliant to GSM phase 2/2+ -Class 4 (2W @ 850/900 MHz) -Class 1 (1W @ 1800/1900 MHz)
GPRS	GPRS multi-slot class 12 GPRS mobile station class B
RMS Phase Error	5 deg
Max RF Output Power	GSM850/GSM900: 33.0±2 dBm DCS1800/PCS1900: 30.0±2 dBm
Dynamic Input Range	-15 ~ -108 dBm
Receiver Sensitivity	Class Ⅱ RBER 2% (-107 dBm)
Stability of Frequency	< 2.5 ppm
Max Frequency Error	±0.1 ppm

GNSS Specifications

GNSS Type	u-blox All-in-One GNSS receiver
Sensitivity	Autonomous: -147 dBm Hot start: -156 dBm Reacquisition: -160 dBm Tracking: -162 dBm
Position Accuracy (CEP)	Autonomous: < 2.5m
TTFF (Open Sky)	Cold start: 27s average Warm start: 27s average Hot start: 1s average

General Specifications

Dimensions	48.9 x 44.5 x 26.6mm 1.93”(L) x 1.76”(W) x 1.05”(H)
Weight	58g (2.05oz)
Backup Battery	Li-Polymer, 250 mAh
Operating Voltage	8V to 32V DC
Operating Temperature	-30℃ ~ +80℃ -40℃ ~ +80℃ for storage

Interfaces

OBDII Port	Provide device power Optional: Allow information to be read from OBDII port Support legislated OBDII protocols: J1850 PWM, J1850 VPW, ISO 9141-2, ISO 14230, ISO 15765-4, J1939
GSM Antenna	Internal only
GNSS Antenna	2 internal GNSS antennas, use the one with better signal automatically
LED Indicators	CEL, GNSS, OBD
Mini USB Interface	Used for upgrading and debugging

Air Interface Protocol

Transmit Protocol	TCP, UDP, SMS
Scheduled Report	Report position and status based on preset time intervals, distance, mileage or a combination of these settings
OBDII Disconnection Alarm	Alarm when OBDII port is disconnected
Geo-fences	Geo-fence alarm and parking alarm, support up to 5 internal geo-fence regions
Power On Report	Report when the device is powered on
Low Power Alarm	Alarm when backup battery is low
Driving Behavior Monitoring	Aggressive driving behavior detection, including harsh braking, acceleration, etc.
Crash Detection	Accident data collection for reconstruction and analysis
Tow Alarm	Alarm for tow event in ignition-off state