Compare

GV56

Micro Vehicle Tracker with BLE Supporting Two-Way Voice

1. Compact size and cost effective

2. Multiple I/Os, including 1-wire interface as well as digital and analog I/O

3. Supports BLE temperature and humidity sensor, BLE key fob and BLE CAN reader

4. Ideal for fleet management, car leasing and stolen vehicle recovery applications

The GV56 is our most cost-effective product for use in light vehicle tracking applications including usage-based insurance, car rental, stolen vehicle recovery, logistics and more. The GV56 optimizes the available I/Os, allowing fuel cut-off, ignition detections, and a single analog sensor in addition to driver ID identification over 1-wire or BLE. Supported accessories include a range of BLE-based fuel and weight monitoring solutions offered from our partners.

Certificates

CE, E-Mark

Related Products

GV56RS

Specifications

GSM Specifications

Frequency Quad band
GSM/GPRS 850 / 900 / 1800 / 1900 MHz
Compliant to GSM phase 2/2+
-Class 4 (2W @ 900/850 MHz)
-Class 1 (1W @ 1800/1900 MHz)
GPRS GPRS multi-slot class 10
GPRS mobile station class B
RMS Phase Error 5 deg
Max RF Output Power GSM850/GSM900: 33.0±2 dBm
DCS1800/PCS1900: 30.0±2 dBm
Dynamic Input Range -15 ~ -108 dBm
Receiver Sensitivity Class Ⅱ RBER 2% (-107 dBm)
Stability of Frequency < 2.5 ppm

GNSS Specifications

GNSS Type MTK GNSS receiver
Sensitivity Autonomous: -148 dBm
Hot start: -163 dBm
Tracking: -165 dBm
Position Accuracy (CEP) Autonomous: < 2.5m
TTFF (Open Sky) Cold start: 32s average
Warm start: 30s average
Hot start: 1s average

General Specifications

Dimensions 79.5 x 44.3 x 11.9mm
3.13”(L) x 1.74”(W) x 0.47”(H)
Weight 55g (1.94oz)
Operating Voltage 8V to 32V DC
Operating Temperature -30℃ ~ +80℃
-40℃ ~ +80℃ for storage
Backup Battery Li-Polymer, 170 mAh
Standby Time Without reporting: 45 hours
5 minutes’ reporting: 30 hours
10 minutes’ reporting: 35 hours
Bluetooth Support Bluetooth 3.0 (two-way voice communication) & BLE 4.0

Interfaces

Digital Inputs 1 positive trigger input for ignition detection or other positive trigger detection
Digital Output 1 digital output, open drain, 150 mA max drive current
Analog Input 1 analog input (0V-30V)
1-wire Interface Support 1-wire temperature sensor and iButton driver ID
GSM Antenna Internal only
GNSS Antenna Internal only
Bluetooth Antenna Internal only
LED Indicators CELL, GNSS

Air Interface Protocol

Transmit Protocol TCP, UDP, SMS
Scheduled Report Report position and status based on preset time intervals, distance, mileage or a combination of these settings
Geo-fences Geo-fence alarm, support up to 20 circular and 20 polygon geo-fence regions
Power On Report Report when the device is powered on
Special Alarm Special alarm based on digital inputs
Remote Control OTA control of digital outputs
Motion Detection Motion alarm based on internal 3-axis accelerometer
Driving Behavior Monitoring Aggressive driving behavior detection, including harsh braking, acceleration, etc.
Jamming Detection Alarm based on jamming detection
Crash Detection Accident data collection for reconstruction and analysis
Tow Alarm Alarm for tow event in ignition-off state

Resource

Product-Related Files

GV56 Flyer(EN)

Schedule Your Consultation