|
Stock: 300590.SZ
LTE Rechargeable Ruggedized Trailer Tracker
The GV600MG is an LTE product specifically designed for heavy duty vehicles including trailers, tankers, refrigerated and flatbed trucks. Its ruggedized waterproof design ensures the product remains reliable when installed in the harsh environments commonly found in heavy transportation such as fuel and chemical transportation. The GV600MG can work for up to three months without external power, making it ideal for tracking trailers even when disconnected. The wide range of pre-integrated wired and wireless accessories provided either by Queclink, or our carefully selected partners, allows users to apply the GV600MG in various fleet industries. Additionally, this product supports dual power sources when mounted on refrigerated trailers and the serial interface is designed for integration with refrigeration unit protocols.
Certificates
FCC, Verizon, PTCRB, AT&T, CE, E-Mark, IC, Anatel
Related Products
LTE Specifications
| Operating Band | Cat M1/Cat NB1: LTE-FDD: B1/ B2/ B3/ B4/ B5/ B8/ B12/ B13/ B18/ B19/ B20/ B25/ B28 |
| Data Transmission | eMTC (DL) 375 Kbps eMTC (UL) 375 Kbps NB1 (DL) 32 Kbps NB1 (UL) 70 Kbps |
EGPRS Specifications
| Frequency | EGPRS 850 / 900 / 1800 / 1900 MHz |
| Data Transmission | GPRS multi-slot class 33 (33 by default) EDGE multi-slot class 33 (33 by default) |
GNSS Specifications
| GNSS Type | u-blox All-in-One GNSS receiver |
| Sensitivity | Autonomous: -147 dBm Hot start: -156 dBm Reacquisition: -160 dBm Tracking: -162 dBm |
| Position Accuracy (CEP) | Autonomous: < 2.5m |
| TTFF (Open Sky) | Cold start: 27s average Warm start: 27s average Hot start: 1s average |
General Specifications
| Dimensions | 138 × 66 × 38mm 5.43’’(L) × 2.60’’(W) × 1.50’’(H) |
| Weight | 320g (11.29 oz) |
| Backup Battery | 2×18650 Li-ion battery, 3.7V, 5800mAH |
| Internal G-sensor | Used for speed alarm and motion alarm |
| Standby Time | 120 days, report one location and online 15 minutes per day |
| Waterproof | IP67 |
| Operating Voltage | DC 8V to 32V |
| Operating Temperature | -30℃~+80℃ |
| Charging Temperature | 10℃~+45℃ |
| Operating Humidity | 0%~95% non-condensing |
| BLE | Support BLE 4.2 protocol |
| Buffer Messages | Up to 10,000 buffer messages |
Interfaces
| Digital Inputs | 1 positive trigger input for ignition detection |
| Analog Input | 1 analog input (0V-32V) |
| 1-wire Interface | Support 1-wire temperature sensor and iButton driver ID (maximum 8 channels) |
| Power Output | 1 power output (3.3V) for external devices |
| Digital Inputs/Outputs | 4 negative trigger inputs for normal use, or 4 open drain outputs 150mA max drive current |
| Serial Port | 1 RS232 port 1 TTL Port |
| Cellular Antenna | Internal only |
| GNSS Antenna | Internal only |
| BLE Antenna | Internal only |
| LED Indicators | CEL, GNSS, PWR |
| Connector | 18 pin waterproof connector |
Air Interface Protocol
| Transmit Protocol | TCP, UDP, SMS |
| Scheduled Report | Report position and status based on preset time intervals, distance, mileage or a combination of these settings |
| Geo-fences | Geo-fence alarm and parking alarm based on up to 20 preset geo-fence regions |
| Low Power Alarm | Alarm when backup battery is almost exhausted |
| Power On Report | Report when the device is powered on |
| Special Alarm | Special alarm based on digital/analog input |
| Remote Control | OTA control of digital outputs |
With Queclink’s GV58CEU and a range of accompanying accessories, effortless driver identification and authorization are achieved, paving the way for more intelligent fleet management.
