GV600WG

UMTS/GSM Rechargeable Ruggedized Trailer Tracker

1. UMTS/GSM globally applicable

2. Ruggedized and waterproof case that is IP67 compliant and designed for use in harsh environments

3. Internal large battery pack with 120-day standby time, supports dual external power sources

4. Supports BLE temperature and humidity sensor, BLE key fob and BLE I/O expander

5. Ideal for trailer, tanker and flatbed truck tracking applications

The GV600WG is a UMTS/GSM product specifically designed for heavy duty vehicles including trailers, tanks, refrigerated and flatbed trucks. Its ruggedized waterproof design ensures the product remains reliable when installed in the harsh environments commonly found in heavy transportation such as fuel and chemical transportation. The GV600WG can operate for up to three months without external power, making it ideal for tracking trailers even when disconnected. The wide range of pre-integrated wired and BLE wireless accessories provided either by Queclink, or our carefully selected partners, allows users to apply it to various fleet industries.

Specifications

UTMS/HSPA Specifications

Operating Band	UMTS/HSPA: 850 / 900 / 1900 / 2100 MHz
Data Transmission	HSPA: Max 7.2 Mbps(DL)/Max 5.76 Mbps(UL) UMTS: Max 384 Kbps(DL)/Max 384 Kbps(UL)

GSM Specifications

Frequency	GSM 850 / 900 / 1800 / 1900 MHz
Data Transmission	GPRS multi-slot class 33 EDGE multi-slot class 33

GNSS Specifications

GNSS Type	u-blox All-in-One GNSS receiver
Sensitivity	Autonomous: -147 dBm Hot start: -156 dBm Reacquisition: -160 dBm Tracking: -162 dBm
Position Accuracy (CEP)	Autonomous: < 2.5m
TTFF (Open Sky)	Cold start: 27s average Warm start: 27s average Hot start: 1s average

General Specifications

Dimensions	135 × 62 × 38mm 5.31’’(L) × 2.44’’(W) × 1.50’’(H)
Weight	320g (11.29 oz)
Backup Battery	Li-ion, 3.7V, 5800 mAh, 18650 battery pack
Standby Time	120 days, report one location and online 15 minutes per day，5800 mAh
Waterproof	IP67 compliant
Operating Voltage	DC 8V to 32V
Operating Temperature	-30℃~+80℃
Operating Humidity	0%~95% non-condensing
Buffer Messages	Up to 10,000 buffer messages

Interfaces

Digital Inputs	1 positive trigger input for ignition detection
Analog Input	1 analog input (0V-32V)
1-wire Interface	Support 1-wire temperature sensor and iButton driver ID
Power Output	1 power output (3.3V)
Digital Inputs/Outputs	4 negative trigger inputs for normal use, or 4 open drain outputs 150mA max drive current
Serial Port	1 RS232 port, 1 TTL port
Cellular Antenna	Internal only
GNSS Antenna	Internal only
BLE Antenna	Internal only
LED Indicators	CEL, GNSS, PWR
Connector	18 pin waterproof connector

Air Interface Protocol

Transmit Protocol	TCP, UDP, SMS
Scheduled Report	Report position and status based on preset time intervals, distance, mileage or a combination of these settings
Geo-fences	Geo-fence alarm, support up to 20 circular and 20 polygon geo-fence regions
Low Power Alarm	Alarm when backup battery is almost exhausted
Power On Report	Report when the device is powered on
Special Alarm	Special alarm based on digital/analog inputs, preset speed and internal 3-axis accelerometer
Remote Control	OTA control of digital outputs