GV65 Plus

Compact Vehicle Tracker with Internal Battery

1. Compact size

2. Multiple I/Os, including 1-wire interface as well as digital and analog I/O

3. Supports a wide variety of accessories, including temperature sensor and driver ID reader

4. Supports external CAN adapter to decode information from vehicle buses (CAN bus and J1708)

The GV65 Plus improves on the GV65 model with an added internal battery. The added battery allows the product to continue to work normally even when the external power supply is cut off for vehicle maintenance or abnormal events. The product is designed to address typical requirements for fleet management in Europe. Its 1-wire interface allows customers to extend its functionality to include options like temperature monitoring and driver ID identification. It also supports CAN data capture via connectivity to our CAN100 accessory, as well as I/O expansion via our extender products. Its optional external antenna ensures accurate GNSS positioning in complex environments or when covert installation is required. The product has also proved effective in other applications, such as logistics, courier and dispatch, and long distance trucking.

Certificates

CE, E-Mark, Anatel

Specifications

GSM Specifications

Frequency	Quad band: 850 / 900 / 1800 / 1900 MHz Compliant to GSM phase 2/2+ -Class 4 (2W @ 850/900 MHz) -Class 1 (1W @ 1800/1900 MHz)
GPRS	GPRS multi-slot class 10 GPRS mobile station class B GPRS class 12 by default
RMS Phase Error	5 deg
Max RF Output Power	GSM850/GSM900: 33.0±2 dBm DCS1800/PCS1900: 30.0±2 dBm
Dynamic Input Range	-15 ~ -108 dBm
Receiver Sensitivity	Class Ⅱ RBER 2% (-107 dBm)
Stability of Frequency	< 2.5 ppm
Max Frequency Error	±0.1 ppm

GNSS Specifications

GNSS Type	u-blox All-in-One GNSS receiver
Sensitivity	Autonomous: -147 dBm Hot start: -156 dBm Tracking & navigation: -162 dBm Reacquisition: -160 dBm
Position Accuracy (CEP)	Autonomous: < 2.5m
TTFF (Open Sky)	Cold start: 27s average Warm start: 27s average Hot start: 1s average

General Specifications

Dimensions	73 x 54 x 22.7mm 2.87”(L) x 2.13”(W) x 0.89”(H)
Weight	62g (2.19oz)
Operating Voltage	8V to 32V DC
Operating Temperature	-30℃ ~ +80℃ ,-40℃ ~ +80℃ for storage
Backup Battery	Li-Polymer, 250 mAh
Buffer Messages	Up to 10,000 buffer messages

Interfaces

Digital Inputs	1 positive trigger input for ignition detection 2 negative trigger inputs for normal use
Digital Output	1 digital output, open drain, 150 mA max drive current
Latched Digital Output	1 digital output with internal latch circuit, open drain, 150 mA max drive current
Analog Input	1 analog input with selectable input voltage range (0V-12V or 0V-30V)
1-wire Interface	Support 1-wire temperature sensor and iButton driver ID
GNSS Antenna	Internal antenna and optional external antenna
GSM Antenna	Internal only
LED Indicators	CEL, GNSS, PWR
Mini USB Interface	Used for upgrading and debugging

Air Interface Protocol

Transmit Protocol	TCP, UDP, SMS
Scheduled Report	Report position and status based on preset time intervals, distance, mileage or a combination of these settings
Geo-fences	Geo-fence alarm and parking alarm, support up to 20 internal geo-fence regions
Power Off Report	Report when the device is powered off
Power On Report	Report when the device is powered on
Motion Detection	Motion alarm based on internal 3-axis accelerometer
Special Alarm	Special alarm based on digital inputs
Power Supply Monitoring	Report/alarm of external power and backup battery status
Tow Alarm	Alarm for tow event in ignition-off state
Speed Alarm	Unusual speed alarm via flexible monitoring of speed
Remote Control	OTA control of digital outputs
Fuel Level Sensing	Configurable support for fuel level sensing using the vehicle’s built-in fuel sensor or gauge
Temperature Detection	Alarm for temperature detection
Driving Behavior Monitoring	Aggressive driving behavior detection, including harsh braking, acceleration, etc.
Crash Detection	Accident data collection for reconstruction and analysis